Switching to driver will disable the auto-tilt.

*note if 'Memory' is checked mirror switch must be set to passenger for option to work. to set your position, have switch on passenger side, and adjust your mirror while in reverse gear. The mirror will tilt to your personal position. To change the tilt of the passenger mirror when in reverse: check 'No' to unlock all doors with one press of the unlock button A second click unlocks remainder passenger doors This allows one click of the unlock button of the remote to unlock the drivers door. *note the lock button closes and unlock opens the windows upon holding of the key check 'Locking (remote control)' to enable closing with remote default 'Opening (remote control)' is checked and 'Locking (remote control)' is unchecked Siren will still go off if doors are breached. you have the siren and motion sensor but no tilt your DWA will show a fault and will not arm. *note you must have all 3 (4 for convertibles) pieces to the alarm otherwise your car will throw a code. check the options with 'optics' and 'acoustics' uncheck DWA interior sensor, rear (unless you have a convertible which has a front and rear interior sensor) *note if you have bits and pieces of the oem alarm, you may enable those options To activate the alarm optics without having a physical alarm: To do any of the functions in the ZKE section: Professional support may be needed if your vehicle suffers from electronic glitches. We are not held liable for any misuses of this device that may have caused problems to your vehicle. No guarantees can be made that this unit along with any other device will fix or repair a vehicle that has been wrecked, burned, modified, or flooded. Only the software provided can be used with this unit. This diagnostic device will work perfectly if your BMW's electrical system is in healthy operating condition. Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4 I also provide remote tech support for all purchases to help set it up if needed.įor cars that are have the 20 pin connection under the hood you would need OBD2 female to 20pin Adapter Cableĭetermine chassis number, model, engine, gearbox and so forthĬopying ZCS (IKE - EWS) and FA (IKE - LCM) codingĭTCs description in DME MS43.0, EWS3, SRS MRS4ĮWS-DME synchronization code in DME MS43.0 Works with Windows XP, Vista, 7, 8 and 10. Also great for quick diagnosis and resetting lights. Great for quick coding without digging too deep into the car and causing problems. So you don't have to do anything to these scanners. I have come across 3-4 different chipsets which require a different fix each time. They are all working with a new chipset that doesn't require any soldering or modifications.

Pa soft bmw scanner 1.4 for alarm